Proper Application Of Adhesive Products

1- Prepare Your Surface - Clean surface with soap and water, all-purpose cleaner, or a mixture of rubbing alcohol and water (50/50).  After drying, wipe all residue with rubbing alcohol.

2- Prepare Your Sticker - Gently pull the backing off the back of the sticker.  Ensure the entire sticker sticks to the front piece of plastic or application paper. 

3- Identify Placement Of Sticker- Before placing your sticker onto the surface, bend the corner of the plastic and don't allow it to stick to the surface.  This provides an easy way to remove the plastic after using a Squeegee or similar tool to apply pressure to your entire sticker, ensuring the complete application is stuck to the surface without any air bubbles.  Once firmly in place, peel the top application plastic or paper from the surface.  Your sticker should be properly applied.  

Be sure to properly align your sticker, as once it is placed on the surface, it will be difficult or impossible to remove without damaging the sticker.

Be sure there are absolutely no foreign substances on your surface before application.  This will cause problems with the adhesive to properly attach to the surface, and the sticker will peel.

Your stickers are extremely durable; however, keep in mind they can still wear down or lose adhesion depending on conditions and circumstances.  Because of the vast amount of potential situations, we do not warrant or guarantee any sticker applications.  

DO NOT USE FOR CRITICAL MISSION SITUATIONS

These stickers are not intended for and should not be used for mission-critical situations or for identifying hazardous or corrosive materials. 

These stickers are created for cosmetic detailing and not for any other purpose.